Silverado 1500 2WD V6-4.3L VIN X (2004)
2. Install the engine mount bracket bolts.
^
Tighten the engine mount bracket bolts to 75 Nm (55 ft. lbs.).
3. Position the engine mount side bracket to the engine, if removed and equipped. (right side shown, left side similar).
4. Install the engine mount side bracket bolts.
^
Tighten the engine mount side bracket bolts to 50 Nm (37 ft. lbs.).
5. Install the engine mount. (right side shown, left side similar).
6. Install the engine mount bolts.
^
Tighten the engine mount bolts to 50 Nm (37 ft. lbs.).
7. Lower the engine.
8. Install the oil pan skid plate and bolts.
^
Tighten the oil pan skid plate bolts to 20 Nm (15 ft. lbs.).
9. Lower the vehicle.
