Silverado 1500 2WD V6-4.3L VIN X (2004)
^
Tighten the nuts to 12 Nm (106 inch lbs.).
28. Connect the EVAP canister harness to the purge solenoid valve.
29. Connect the following electrical connectors:
^
The EVAP canister purge solenoid valve (1)
^
The MAP sensor (2)
30. Connect the following electrical connectors:
^
The TP sensor (1)
^
The IAC motor (2)
^
The control port injector module (3)
31. Install the engine wiring harness clip bolt (4).
^
Tighten the bolt to 9 Nm (80 inch lbs.).