Silverado 1500 2WD V6-4.3L VIN X (2004)
Camshaft Position Sensor: Service and Repair
CAMSHAFT POSITION (CMP) SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the ignition coil wire from the distributor.
2. Remove the spark plug wires from the distributor.
2.1.
Twist the spark plug wire boot 1/2 turn.
2.2.
Pull only on the boot or use a tool designed for this purpose in order to remove the wires from the distributor.
3. Disconnect the camshaft position (CMP) sensor electrical connector (2).
