Silverado 1500 2WD V6-4.3L VIN X (2004)
10. Install the positive cable (1) to the junction block.
11. Snap the junction block cover.
IMPORTANT: The bolt is integral to the battery cable and is not removable.
12. Tighten the positive cable bolt at the UBEC.
Tighten
Tighten the bolt to 9 N.m (80 lb in).
13. Install the positive battery cable.
14. Tighten the positive battery cable.
Tighten
Tighten the bolt to 17 N.m (13 lb ft).
