chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Front Door Panel > < Door Latch Assembly (Door Jamb Switch)|Page 18249
Page 1
background image

Front Door Limiter: Service and Repair

Door Check Link Replacement

Removal Procedure

1. Fully open the door.
2. Remove the door trim panel.
3. Remove the water deflector.

4. Remove the body-side check link pillar bolt.
5. Remove the check strap plug.
6. Remove the door-side check strap nuts.
7. Pull the check strap from the inside of the door.

Installation Procedure

1. Install the check strap in the door.
2. Install the check strap in the body.

Notice:  Refer to Fastener Notice in Service Precautions.

3. Install the check strap nuts.

Tighten the nuts to 9 N.m (80 lb in).

4. Clean the threads of the check link bolt and reapply LOCTITE(R) 242, GM P/N 12345382 (Canadian P/N 10953489).
5. Install the check link bolt.

Tighten the bolt to 25 N.m (18 lb in).

6. Install the water deflector.
7. Install the door trim panel.

Front Door Panel > < Door Latch Assembly (Door Jamb Switch)|Page 18249