Silverado 1500 2WD V8-4.8L VIN V (2006)
2. Remove the bolts from the hinge assembly, if equipped with folding seats.
3. Remove the seat cushion frame.
INSTALLATION PROCEDURE
1. Install the seat cushion frame.
2. Install the bolts to the hinge assembly, if removed.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolts to 35 N.m (26 lb ft).
3. Install the seat cushion trim cover (8) and the pad (7).
Seat Cushion Heater Element Replacement - Front
SEAT CUSHION HEATER ELEMENT REPLACEMENT - FRONT
REMOVAL PROCEDURE
1. Remove the seat trim panel.
CAUTION: If the passenger seat cushion foam is damaged when you remove the heater element, replace the passenger pressence system in
order to prevent personal injury.
2. Remove the seat cushion trim cover.