Silverado 1500 2WD V8-4.8L VIN V (2006)
Seat Latch: Service and Repair
Seat Back Latch Replacement - Rear
Removal Procedure
1. Remove the rear seat from the vehicle.
2. Remove the armrest, if equipped.
3. Remove the seat back cover.
4. Remove the bolts (1,2) that retain the latch assembly to the seat frame.
5. Unsnap the recliner cables from the folding mechanism.
6. Remove the seat back latch assembly from the seat frame.
Installation Procedure
1. Install the seat back latch assembly to the seat frame.
2. Attach the recliner cables to the folding mechanism.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the bolts (1,2) that retain the latch assembly to the seat frame.
Tighten the bolts to 45 N.m (33 lb ft).
4. Install the seat back cover.
5. Install the armrest, if equipped.
6. Install the rear seat to the vehicle.
