Silverado 1500 2WD V8-4.8L VIN V (2006)
Parking Brake Cable: Service and Repair
Replacement - Right Rear
w/Rear Drum
Park Brake Cable Replacement - Right Rear (Drum Brakes)
Tools Required
J 37043 Parking Brake Cable Release Tool
Removal Procedure
Caution: Refer to Brake Dust Caution.
Caution: Refer to Brake Fluid Irritant Caution.
1. Ensure that the park brake is released.
2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
3. Relieve tension on the park brake cables by pulling down on the front park brake cable (1) just in front of the equalizer.
4. Remove the right park brake cable (2) from the equalizer.
5. Remove the park brake cable from the frame bracket and guides.
6. Remove the cable clip bolt (1) at the rear axle housing.
7. Remove the right cable (3) from the clip on top of the rear axle housing.
8. Remove the rear brakes shoes. Refer to Brake Shoe Replacement.
