chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Replacement - Front|Page 13062 > < Replacement - Front|Page 13060
Page 15
background image

6. Install the park brake cable through the frame bracket and guides.
7. Install the right park brake cable (2) to the equalizer.
8. Lower the vehicle. 
9. Adjust the park brakes. Refer to Park Brake Adjustment (w/Rear Disc) Park Brake Adjustment (w/Rear Drum).

w/Rear Disc

Park Brake Cable Replacement - Right Rear (Disc Brakes)

Removal Procedure

1. Release the park brake.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
3. Release the park brake.
4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

5. For all 15 series vehicles, relieve the tension from the park brake cable by pulling down on the park brake cable in front of the equalizer and

removing the right park brake cable from the equalizer bar.

Replacement - Front|Page 13062 > < Replacement - Front|Page 13060