Silverado 1500 2WD V8-4.8L VIN V (2006)
11. If equipped with an automatic transmission, position the transmission fluid fill tube to the studs.
12. Install the transmission fluid fill tube to bellhousing nuts.
Tighten the nuts to 18 Nm (13 ft. lbs.).
13. Install the exhaust manifold pipe.
14. Slide the exhaust manifold pipe hanger into the insulator.
15. Install the exhaust muffler nuts until snug.
16. Slide the exhaust pipe clamp down onto the exhaust pipe.
17. Tighten the exhaust manifold pipe clamp.
Tighten the clamp and nuts to 40 Nm (30 ft. lbs.).
18. Lower the vehicle.