Silverado 1500 2WD V8-4.8L VIN V (2006)
Drive Belt: Service and Repair
Drive Belt Replacement
Drive Belt Replacement - Accessory
Removal Procedure
1. Loosen the air cleaner outlet duct clamps at the following locations:
^
The throttle body
^
The mass airflow/intake air temperature (MAF/IAT) sensor
2. Disconnect the radiator inlet hose clip from the outlet duct.
3. Remove the air cleaner outlet duct.
4. Install a breaker bar with hex-head socket to the drive belt tensioner bolt.
5. Rotate the drive belt tensioner clockwise in order to relieve tension on the belt.
6. Remove the belt from the pulleys and the drive belt tensioner.
7. Slowly release the tension on the drive belt tensioner.
