Silverado 1500 2WD V8-4.8L VIN V (2006)
9. Remove the fuel line clip from the bracket on the transmission.
10. If equipped with 4-wheel drive (4WD), remove the fuel line clip from the bracket on the transfer case.
11. Remove the clip from the bracket on the frame.
12. Remove the transfer case harness from the clip bracket.
13. Thoroughly wash all contaminants from around the EHCU.
IMPORTANT: The area around the electro-hydraulic control unit (EHCU) MUST be free from loose dirt to prevent contamination of disassembled
anti-lock brake (ABS) components.
14. Disconnect the chassis electrical harness connectors from the electronic brake control module (EBCM).
15. Disconnect the brake lines from the brake pressure modulator valve (BPMV).
IMPORTANT: Make sure the brake lines are tagged and kept in order for proper reassembly.
16. Remove the bolts (4) attaching the EHCU bracket to the frame (5).
17. Remove the EHCU (1).
