Silverado 1500 2WD V8-4.8L VIN V (2006)
Important: The gears between the ignition switch and the lock cylinder housing must be in the correct position. Failure to do so will cause a
misalignment of the gears in the ignition switch and the lock cylinder housing, which may result in a NO START or BATTERY DRAIN.
3. Align the lock cylinder and install into the lock cylinder housing.
4. Install the steering column trim covers.
5. Install the hush and knee bolster.
6. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in Restraint Systems.
7. Connect the negative battery cable.
