Silverado 1500 2WD V8-4.8L VIN V (2006)
20. Install the TCC PWM solenoid (1) to the valve body.
21. Install the TCC PWM solenoid retainer (2).
22. Install the transmission fluid indicator stop bracket (1) and bolt (2).
^
Tighten the bolt to 11 Nm (97 inch lbs.).
23. Connect the internal wiring harness electrical connectors to the following components:
^
The transmission fluid pressure manual valve position switch (1)
^
The 1-2 shift solenoid (2)
^
The 2-3 shift solenoid (3)
^
The pressure control solenoid (4)
^
The TCC PWM solenoid (5)
^
The 3-2 shift solenoid (6)
24. Install the auxiliary pump, if equipped with RPO HP2.
25. Install the transmission filter.
