Silverado 1500 2WD V8-4.8L VIN V (2006)
11. If equipped with a 8.1L engine, remove the negative cable clip from the positive cable clip.
12. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
13. Remove the positive battery cable channel bolt.
14. Slide the channel pin out of the oil pan tab.
15. Remove the positive battery cable from the channel.
16. If equipped with a 4.8L, 5.3L, or 6.0L engine, remove the battery cable bracket bolt and bracket from the power steering pump.
17. If equipped with a 4.8L, 5.3L, or 6.0L engine, remove the starter lead nut.
18. Remove the positive cable from the starter.
19. Remove the positive cable clip from the clip on the oil pan.
20. Remove the positive cable from the clip on the oil pan.
21. Remove the positive battery cable.
