Silverado 1500 2WD V8-4.8L VIN V (2006)
Alignment: Service and Repair
Rear Toe Adjustment
Rear Toe Adjustment
1. Loosen the jam nut on the tie rod (1).
2. Rotate the inner tie rod to the required toe specification setting.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants,
or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may
damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
3. Tighten the jam nut on the tie rod. Tighten the tie rod jam to 65 Nm (48 lb ft).
4. Check the toe setting after tightening.
5. Re-adjust the toe setting if necessary.
