chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Power Steering Cooler Pipe/Hose Replacement (With Hydroboost)|Page 14959 > < Power Steering Cooler Pipe/Hose Replacement (With Hydroboost)|Page 14957

Silverado 1500 2WD V8-4.8L VIN V (2006)

Page 8
background image

1. Install the gear inlet hose to the gear (4).

Notice:  Refer to Installing Hoses Without Twists or Bends Notice in Service Precautions.

Important:  Following this sequence ensures correct routing and orientation.

2. Install the booster inlet hose to the pump.

Important:  Ensure that the hose contacts the power steering pump as shown.

Power Steering Cooler Pipe/Hose Replacement (With Hydroboost)|Page 14959 > < Power Steering Cooler Pipe/Hose Replacement (With Hydroboost)|Page 14957