Silverado 1500 2WD V8-4.8L VIN V (2006)
5. Install the bolt (2) retaining the brake hose bracket (1) to the axle.
^
Tighten the brake hose bracket retaining bolt to 12 Nm (106 inch lbs.).
6. Install the tire and wheel.
7. Perform a four wheel alignment. Refer to Measuring Wheel Alignment (w/Rear Wheel Steering) Measuring Wheel Alignment (w/o Rear Wheel
Steering) in Wheel Alignment.
Lower Ball Joint Replacement
Lower Ball Joint Replacement
Removal Procedure
Notice: Refer to Rear Wheel Steering Vehicle Lifting in Service Precautions.
1. Remove the tire and wheel.
2. Remove the snap ring (2) from the ball joint stud (1).
3. Remove the bolts (2) retaining the lower ball joint (3) to the steering knuckle.
4. Remove the pinch bolt (1) retaining the lower ball.
