Silverado 1500 2WD V8-4.8L VIN V (2006)
5. Remove the lower ball joint (2) from the vehicle.
Installation Procedure
1. Install the lower ball joint (2) to the vehicle.
2. Install the bolts (2) retaining the lower ball joint (3) to the steering knuckle.
^
Tighten the bolts to 110 Nm (81 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the lower ball joint pinch bolt (1).
^
Tighten the bolt to 230 Nm (169 ft. lbs.).
4. Install the snap ring (2) to the lower ball joint.
5. Install the tire and wheel.
6. Perform a four wheel alignment.
