chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Wheels/Tires - 20 Inch Wheels Available From GM|Page 15619 > < Wheels/Tires - 20 Inch Wheels Available From GM|Page 15617
Page 6
background image

Provide all information required on the form.

Make a copy of the completed form for the customer to keep in the vehicle along with their Owner's Manual.

File the original completed form in the Dealership's Vehicle Service History folder.

Because this is not a warranty repair, dealers will incur a charge to obtain a VCI number.

A VCI number will only be available for the following models:

1999-2007 Chevrolet Silverado and GMC Sierra (1500 Series Only)

EXCLUDES 1999-2000 vehicles equipped with 4.3L engine (RPO L35)

EXCLUDES vehicles equipped with Quadrasteer (RPO NYS)

EXCLUDES Parallel Hybrid Truck (RPO HP2)

EXCLUDES 2001-2004 vehicles equipped with Traction Control (RPO NW7) combined with 3.42 Axle Ratio (RPO GU6)

Refer to the Model Application Chart to in the beginning of this bulletin to verify usage. 

Calibrations are not available for 1999 and 2000 model year vehicles with 3.08 axle.

Calibrations are not available for 1999 and 2000 model year vehicles equipped with 4.3L engine (RPO L35).

If original equipment tires/wheels are reinstalled, it will be necessary to reset the programming of the PCM and the ABS module to the original
specifications.

Labels

After installing the recommended P275/55R20 tires, place the provided label on the vehicle. The label should be located on the doorjamb, near the
original tire label, and should not cover up the original tire label. Be sure that the surface is clean and dry. The surface temperature should not be less
than 21°C (70°F).

The label is provided as a guide for tire inflation pressures and information relevant to occupant/cargo capacities.

Wheels/Tires - 20 Inch Wheels Available From GM|Page 15619 > < Wheels/Tires - 20 Inch Wheels Available From GM|Page 15617