Silverado 1500 2WD V8-4.8L VIN V (2006)
13. Assemble the 1-2 accumulator assembly (54, 56, 57, 104). Ensure that the piston legs face the accumulator cover.
Important: RPO M33 transmissions do not use a 1-2 accumulator spring inner (104).
14. Install the 1-2 accumulator cover (57) and pin.
15. Install the 1-2 accumulator cover and the accumulator cover bolts.
^
Tighten the bolts to 11 Nm (97 inch lbs.).
16. Remove the J 25025-B from the transmission case.
17. Install the valve body.
18. Install the transmission filter.
