Silverado 1500 2WD V8-4.8L VIN V (2006)
14. Remove the transmission range selector cable bracket (2) bolts and bracket from the transmission. Reposition the bracket with cable.
Important: It is not necessary to remove the selector cable from the bracket.
15. Remove the oil pan bolts.
16. Remove the oil pan and gasket.
Important: The transmission oil pan gasket is reusable. Inspect the gasket and replace as needed.
17. Remove the magnet from the bottom of the pan, if necessary.
18. Remove the oil filter.
19. Remove the filter neck seal.
20. Clean the transmission case and the oil pan gasket surfaces with solvent.
Installation Procedure
