Silverado 1500 2WD V8-4.8L VIN V (2006)
1. Install the filter neck seal.
2. Install the oil filter.
3. Install the oil pan gasket to the pan.
4. Install the magnet into the bottom of the pan, if necessary.
5. Install the oil pan and bolts.
^
Tighten the oil pan bolts to 24 Nm (18 ft. lbs.)
6. Position the bracket with cable. Install the transmission range selector cable bracket (2) and bolts to the transmission.
^
Tighten the selector bracket bolts to 25 Nm (18 ft. lbs.)
7. Connect the range selector cable end (2) to the transmission range selector lever ball stud (1).
