Silverado 1500 2WD V8-4.8L VIN V (2006)
10. Install the range selector cable end (2) to the transmission range selector lever ball stud (1).
11. Lower the vehicle.
12. Install the range selector cable to the support.
Important: Avoid unnecessary twisting/bending of the range selector cable when removing the cable from the support.
13. Install the bolt securing the cable support to the brace.
^
Tighten the bolt to 10 Nm (89 inch lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
14. Install the cable to the steering column bracket.
15. Install the cable end to the steering column ball stud.
