Silverado 1500 2WD V8-4.8L VIN V (2006)
6. Inspect bores for wear, scratches, and grooves. Remove scratches and burrs with crocus cloth. Replace deeply grooved or scratched parts.
7. Inspect threaded parts for burred or damaged threads. Remove burrs with a soft stone or fine file.
8. Inspect threaded openings for damaged threads. Correct damaged threads with a correctly sized tap.
Pressure Control Solenoid 1 (PCS1)/PSC2 and the Torque Converter Clutch (TCC) PCS Retaining Bracket Inspection
1. Measure the angle between the surfaces of the PCS1/PCS2 retaining bracket (1), and the TCC PCS retaining bracket (2), as shown in insert, angle
A.
2. Adjust the bracket surfaces until the angle between the surfaces is 82.84 degrees.
Control Valve Body Assemble
Control Valve Body Assemble
^
Tools Required
-
J 33163 Valve Tray Set
-
J 43773 Valve Spring Compressor
Shift Valve Body Assemble
