Silverado 1500 2WD V8-4.8L VIN V (2006)
3. Push in and rotate the clutch master cylinder 45 degrees counterclockwise to the locked position.
4. If equipped with a ZF S6-650 transmission, disconnect the clutch actuator cylinder to clutch master cylinder quick connect fitting.
5. If equipped with a NV 3500 or NV 4500 transmission, disconnect the clutch actuator cylinder to clutch master cylinder quick connect fitting.
6. Install the clutch master cylinder clip to the brake pressure module valve pipe.
7. Apply light pressure to the clutch pedal to couple the pushrod socket to the clutch pedal.
8. Connect the clutch pedal position switch electrical connector (1).
9. Pump the clutch pedal 3 time prior to starting the vehicle to ensure connection is complete.
