Silverado 1500 2WD V8-4.8L VIN V (2006)
16. Remove the inner race (1) from the cage (2) by rotating the inner race (1) upward.
17. Clean the following items thoroughly with cleaning solvent. Remove all traces of old grease and any contaminates.
1. The inner and outer race assemblies
2. The CV joint cage
3. The chrome alloy balls
18. Dry all the parts.
19. Check the CV joint assembly for unusual wear, cracks, or other damage.
20. Replace any damaged parts.
21. Clean the halfshaft bar. Use a wire brush to remove any rust in the seal mounting area (grooves).
Assembly Procedure
1. Inspect all of the parts for unusual wear, cracks, or other damage. Replace the CV joint assembly if necessary.
2. Put a light coat of the recommended grease on the inner (6) and the outer race (8) grooves.
