Silverado 1500 2WD V8-4.8L VIN V (2006)
1. Place the new TFP manifold assembly (2) in position and install one bolt (1) in a recessed location to hold in position. Start the remaining five
bolts (1) in recessed locations and tighten the bolts by hand.
Torque the bolts to 12 Nm (108 inch lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
2. Connect the internal wiring harness connector to the TFP switch.
3. Install the oil pan and transmission internal oil filter.
