Silverado 1500 2WD V8-5.3L (2007)
45. Connect the engine wiring harness electrical connector (4) to the MAP sensor.
46. Connect the engine harness electrical connector (2) to the EVAP canister purge solenoid.
47. Install the engine harness retainer to the stud and locator pin.
48. Install the engine harness retainer nut (1).
Tighten the nut to 5 N.m (44 lb in).
49. Install the generator.
50. Install the air cleaner outlet duct.
Upper Intake Manifold Cover Replacement
Upper Intake Manifold Cover Replacement
Removal Procedure
