Silverado 1500 2WD V8-5.3L (2007)
Heat Shield: Service and Repair
Exhaust Heat Shield Replacement - Dash Panel
Exhaust Heat Shield Replacement - Dash Panel
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the exhaust heat shield nuts.
3. Remove both wheelhouse panels.
4. Remove the exhaust heat shield (1, 3) from the dash panel studs.
5. Remove the heat shield (1, 3) through the respective wheelwell.
Installation Procedure
1. Install the heat shields (1, 3) through the respective wheelwell.
2. Install the exhaust heat shield (1, 3) to the dash panel studs.
Notice: Refer to Fastener Notice.
3. Install the exhaust heat shield nuts.
Tighten the nuts to 9 N.m (80 lb in).
4. Lower the vehicle.