Silverado 1500 2WD V8-5.3L (2007)
3. Position and connect the EVAP pipe quick connect fittings to the fuel tank module. Refer to Plastic Collar Quick Connect Fitting Service.
4. Install the EVAP pipe to the fuel tank clips (1).
5. Remove the fuel tank.
Evaporative Emission (EVAP) Hoses/Pipes Replacement - 1500 Reg Cab w/26 gal Tank
Evaporative Emission System Hoses/Pipes Replacement (15 Reg Cab w/26 gal Tank)
Removal Procedure
Important: Clean all fuel and evaporative emission (EVAP) line connections and surrounding areas prior to disconnecting the lines in order to
avoid possible fuel and/or EVAP system contamination.
1. Remove the fuel tank.
2. Remove the EVAP canister purge pipe from the fuel tank clip (1).
