Silverado 1500 2WD V8-5.3L (2007)
15. If equipped with 6 ft 5 in. bed, perform the following steps:
16. Disconnect the fuel tank EVAP line quick connect fitting (1) from the fuel fill pipe recirculation line.
17. Loosen the fuel tank fill pipe clamp (2) at the fuel tank.
18. Remove the fuel tank fill pipe.
19. Cap the opening on the fuel tank in order to prevent possible system contamination.
Installation Procedure
1. If equipped with 6 ft 5 in. bed, perform the following steps:
2. Remove the cap from the opening on the fuel tank.
3. Position the fuel tank fill pipe.
Notice: Refer to Fastener Notice.
4. Tighten the fuel tank fill pipe clamp (2) at the fuel tank.
Tighten the clamp to 2.5 N.m (22 lb in).