Silverado 1500 2WD V8-5.3L Hybrid (2004)
6. Slowly release the tension on the A/C belt tensioner.
7. Remove the ratchet from the A/C belt tensioner.
8. Inspect the A/C belt for proper installation and alignment.
9. Install the engine shield.
Notice: Refer to Fastener Notice in Service Precautions.
10. Install the engine shield bolts.
^
Tighten the bolts to 20 Nm (15 ft. lbs.).
11. Lower the vehicle.
12. Install the accessory drive belt.