Silverado 1500 2WD V8-5.3L Hybrid (2004)
Tighten the compressor discharge hose nut to 16 N.m (12 lb ft).
7. Install the lower bolts to the hood latch support bracket.
Tighten
Tighten the compressor discharge hose nut to 9 N.m (80 lb in).
8. Install the tie bar to radiator brace bolts (1). Access the bolts from the rear of the upper radiator support.
Tighten
Tighten the compressor discharge hose nut to 9 N.m (80 lb in).
9. Install the grille.
10. Evacuate and recharge the system. Refer to Refrigerant Recovery and Recharging.
11. Leak test the fittings of the component using the J 39400-A.
