Silverado 1500 2WD V8-5.3L Hybrid (2004)
55. Install the battery resistor (4) to the number 3 battery negative terminal.
56. Install NEW tie straps securing the power cables to the ESB.
57. Install the power cables (3).
58. Install the battery 2 to battery 3 power cable nuts (1).
59. Install the power cable nut (2) to the current sensor.
Tighten
Tighten the nuts to 10 N.m (89 lb in).
60. Connect the battery resistor electrical connector (1), labeled XR3 to the number 3 battery negative terminal resistor.
61. Install the maxi-fuse (2).
62. Install the maxi-fuse nuts (1).
