chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Vehicle Speed Sensor > < Transmission Position Switch/Sensor, A/T|Locations|Page 4197
Page 3
background image

8. Connect the PNP switch electrical connector (2).
9. If equipped with 4WD, install the front propeller shaft.

10. Lower the vehicle.
11. Check the switch for proper operation. The engine must start in the park (P) or neutral (N) positions only. If proper operation of the switch can not

be obtained, replace the switch.

Vehicle Speed Sensor > < Transmission Position Switch/Sensor, A/T|Locations|Page 4197