Silverado 1500 2WD V8-5.3L Hybrid (2004)
10. Notice:
Refer to Fastener Notice in Service Precautions.
Notice: Torque valve body bolts in a spiral pattern starting from the center. If the bolts are torqued at random, valve bores may be distorted and
inhibit valve operation.
^
Tighten the valve body bolts in a spiral pattern starting from the center, as indicated by the arrows.
^
Tighten the bolts in the sequence shown to 11 Nm (97 inch lbs.).
11. Ensure that the manual detent spring is aligned properly with the detent lever.
^
Tighten the bolt to 11 Nm (97 inch lbs.).
12. Install the TCC solenoid with a NEW O-ring seal to the valve body.