Silverado 1500 2WD V8-5.3L VIN T (2005)
1. Hold the cylinder (3) so that the side with 4 tumbler spring wells is facing up.
2. Insert tumbler springs (2) into the 4 spring wells.
3. Install the tumbler (1) for key cut position 7 into the slot nearest to the front of the lock cylinder.
4. Install the 3 remaining tumblers, key cut positions 8, 9 and 10, into the cylinder.
5. Snap the tumblers into place with light hand pressure.
6. Inspect for the correct loading of the tumblers (1) by inserting the key into cylinder (3). All of the tumblers should be flush with the lock cylinder.
CONSOLE KEY
The console key is available only on luxury vehicles. Use the console key in order to access or lock the center console. There is a number stamped on
the key and the lock cylinder for cutting or for ordering a new key. The key information described does not refer to the console key. Contact the Presto
Lock Company at 248-594-9500 and supply Presto Lock Company with the cylinder code. Presto Lock Company will supply the key cut information
or provide a copy of the key.
