Silverado 1500 2WD V8-5.3L VIN T (2005)
Tie Rod End: Service and Repair
Rear Wheel Steering
Rear Wheel Steering Tie Rod End Replacement - Outer
^
Tools Required
-
J 24319-B Universal Steering Linkage Puller
Removal Procedure
Notice: Refer to Rear Wheel Steering Vehicle Lifting in Service Precautions.
1. Remove the tire and wheel.
2. Remove the outer tie rod retaining nut (1).
3. Loosen the tie rod jam nut (1).
4. Remove the nut retaining the outer tie rod end to the steering knuckle.
5. Using the J 24319-B (1), remove the outer tie rod end from the steering knuckle.
6. Remove the outer tie rod end from the inner tie rod.
Installation Procedure