Silverado 1500 2WD V8-5.3L VIN T (2005)
Notice: Refer to Service Precautions.
Important: Do not reuse the rear axle housing cover bolts.
3. Fill the rear axle. Use the proper fluid.
4. Install the rear axle fill plug.
^
Tighten the rear axle fill plug to 33 Nm (24 ft. lbs.).
5. Lower the vehicle.
Lubricant Replacement - Rear Drive Axle (9.75 Inch Axle)
Lubricant Replacement - Rear Drive Axle (9.75 Inch Axle)
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the rear axle fill plug.
3. Remove the rear axle drain plug.
4. Drain the lubricant into a suitable container.
5. Inspect the drain plug for excessive metal particle accumulation. This accumulation is symptomatic of extreme wear.
6. Clean the drain plug.
Installation Procedure