Silverado 1500 2WD V8-5.3L VIN Z Flex Fuel (2006)
3. Insert a flat-bladed tool between the trim panel and the door in order to carefully pry the panel from the door.
Installation Procedure
1. Install the trim panel to the door by pressing the panel edges until the panel is in place.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the screws that retain the trim panel armrest.
Tighten the trim panel armrest screws to 2 N.m (18 lb in).
3. Install the door handle bezel.
Trim Panel Replacement - Side Rear Door (Crew Cab)
Trim Panel Replacement - Side Rear Door (Crew Cab)
Removal Procedure
1. Remove the door handle bezel.
2. Remove the window-regulator handle, if equipped.
3. Using a flat-bladed tool, remove the reflector lamp from the trim panel, and disconnect the electrical connector, if required.
4. Remove the manual lock lever from the trim panel using a flat-bladed tool.
