Silverado 1500 2WD V8-5.3L VIN Z Flex Fuel (2006)
5. For 25/35 series vehicles, disable the park brake cable automatic adjuster.
6. For 25/35 series vehicles, disconnect the cable at the equalizer.
Installation Procedure
1. For 25/35 series vehicles, connect the cable at the equalizer.
2. For 25/35 series vehicles, enable the park brake cable automatic adjuster.
3. For the 15 series vehicles, connect the rear park brake cables to the equalizer.
4. For the 15 series vehicles, install the nut to the threaded end of the intermediate cable.
Tighten the nut to 3.5 Nm (31 inch lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
5. Remove the safety stands and lower the vehicle.
6. Adjust the park brake system.
