Silverado 1500 2WD V8-6.0L (2010)
32. Inspect the brake pipe flare for correct shape and diameter (a).
*
6.74-7.10 mm (0.265-0.279 in) flare diameter for 4.76 mm (3/16 in) diameter pipe
*
8.57-9.27 mm (0.344-0.358 in) flare diameter for 6.35 mm (1/4 in) diameter pipe
*
10.42-10.79 mm (0.410-0.425 in) flare diameter for 7.94 mm (5/16 in) diameter pipe
33. If necessary, using the removed section of brake pipe as a template, shape the new pipe with a suitable brake pipe bending tool.
Note: When installing the pipe, maintain a clearance of 19 mm (3/4 in) from all moving or vibrating components.
34. Install the pipe to the vehicle with the appropriate brake pipe unions, as required.
35. If previously released, secure the brake pipe to the retainers.
36. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair)Hydraulic
Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair)Hydraulic Brake System Bleeding (Two-mode Hybrid) (See: Brake
Bleeding/Service and Repair).
37. With the aid of an assistant, inspect the brake pipe flares for leaks by starting the engine and applying the brakes.
Front Brake Hose Replacement (JH6, JH7)
Front Brake Hose Replacement (JH6, JH7)
