Silverado 1500 2WD V8-6.0L (2010)
6. Install the accumulator retainer ring (1).
7. Release the C-clamp.
8. Remove the nut from the stud.
9. Remove the J-26889 - Compressor.
10. Install the master cylinder to the hydraulic booster. Refer to Master Cylinder Replacement (Vacuum Assist) (See: Hydraulic System/Brake
Master Cylinder/Service and Repair/Removal and Replacement/Master Cylinder Replacement)Master Cylinder Replacement (Two-Mode Hybrid)
(See: Hydraulic System/Brake Master Cylinder/Service and Repair/Removal and Replacement/Master Cylinder Replacement)Master Cylinder
Replacement (Hydraulic Assist) (See: Hydraulic System/Brake Master Cylinder/Service and Repair/Removal and Replacement/Master Cylinder
Replacement).
11. Release the park brake and unblock the wheels.
