Silverado 1500 2WD V8-6.0L (2010)
Coolant Reservoir: Service and Repair
Radiator Surge Tank Inlet Hose/Pipe Replacement
Radiator Surge Tank Inlet Hose/Pipe Replacement (Non-HP2)
Removal Procedure
1. Drain the cooling system. Refer to Cooling System Draining and Filling (Vac-N-Fill) (See: Service and Repair)Cooling System Draining and
Filling (Static Fill) (See: Service and Repair).
2. Reposition the surge tank inlet hose clamp from the radiator.
3. Remove the surge tank inlet hose from the radiator.
4. Reposition the surge tank inlet hose clamp at the surge tank.
5. Remove the surge tank inlet hose (1) from the surge tank.
Installation Procedure