Silverado 1500 2WD V8-6.0L (2010)
3. If vehicle has a extended cab, position and install the rear exhaust heat shield (2) and/or the front exhaust heat shield (1) to the underbody studs.
4. Install the exhaust heat shield nuts and tighten to 9 Nm (80 lb in).
5. If vehicle has a regular cab, position and install the rear exhaust heat shield (2) and/or the front exhaust heat shield (1) to the studs.
6. Install the exhaust heat shield nuts and tighten to 9 Nm (80 lb in).
7. Install the catalytic converter. Refer to Catalytic Converter Replacement (LY6 with Exhaust Flange) (See: Catalytic Converter/Service and
Repair)Catalytic Converter Replacement (L9H with Exhaust Flange) (See: Catalytic Converter/Service and Repair)Catalytic Converter
Replacement (Gen IV Engines with Exhaust Clamp) (See: Catalytic Converter/Service and Repair)Catalytic Converter Replacement (LFA with
Exhaust Clamp) (See: Catalytic Converter/Service and Repair)Catalytic Converter Replacement (LMM) (See: Catalytic Converter/Service and
Repair).
