Silverado 1500 2WD V8-6.0L (2010)
Fuel Pressure: Testing and Inspection
Fuel Pressure Gauge Installation and Removal
Fuel Pressure Gauge Installation and Removal
Special Tools
CH-48027 Digital Pressure Gauge
Installation Procedure
Warning: Refer to Gasoline/Gasoline Vapors Warning (See: Fuel/Service Precautions).
Warning
Remove the fuel tank cap and relieve the fuel system pressure before servicing the fuel system in order to reduce the risk of personal injury. After you
relieve the fuel system pressure, a small amount of fuel may be released when servicing the fuel lines, the fuel injection pump, or the connections. In
order to reduce the risk of personal injury, cover the fuel system components with a shop towel before disconnection. This will catch any fuel that may
leak out. Place the towel in an approved container when the disconnection is complete.
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (CH-48027) (See: Fuel Filter/Fuel Pressure Release/Service and Repair).
2. Connect the CH-48027-1 (1) to the CH-48027-2 (2).
3. Remove the shop towel from around the fuel rail service port, and place in an approved gasoline container.
4. Perform any tests and/or diagnostics as needed. For the proper usage of the CH-48027 , refer to the manufacture's directions.
Removal Procedure
