Silverado 1500 2WD V8-6.0L (2010)
5. Remove the CKP sensor.
Installation Procedure
1. Install the CKP sensor.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the CKP sensor bolt.
Tighten the bolt to 25 Nm (18 lb ft).
3. Connect the engine wiring harness electrical connector (1) to the CKP sensor.
4. Install the starter. Refer to Starter Replacement (V8) (See: Starting and Charging/Starting System/Starter Motor/Service and Repair)Starter
Replacement (V6) (See: Starting and Charging/Starting System/Starter Motor/Service and Repair)Starter Replacement (6.6L) (See: Starting and
Charging/Starting System/Starter Motor/Service and Repair).
5. Perform the CKP system variation learn procedure. Refer to Crankshaft Position System Variation Learn (See: Testing and Inspection).
