Silverado 1500 2WD V8-6.0L (2010)
8. Reposition the auxiliary negative battery cable away from the battery.
Connect Procedure
Warning: Refer to Battery Disconnect Warning (See: Service Precautions).
Note: Clean any existing corrosion from the battery terminal and the battery cable end.
1. Install the auxiliary battery negative cable (2) onto the auxiliary battery negative post.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Tighten the auxiliary battery negative cable clamp nut (2) to 7.5 Nm (66 lb in).
3. Install the primary battery negative cable onto the primary battery negative post.
4. Tighten the primary battery negative cable clamp nut (1) to 5 Nm (44 lb in).
5. Close the hood.
