Silverado 1500 2WD V8-6.0L (2010)
7. Install the J 36202 to the adjustment arm and the crossmember.
8. Using the J 36202 , increase the tension on the adjustment arm to load the torsion bar.
9. Turn the adjuster bolt the same amount of turns as it took to remove it.
10. Remove the J 36202 from the crossmember.
11. Remove the safety stands and lower the vehicle.
12. Measure the Z height. Refer to Trim Height Inspection (See: Testing and Inspection/Component Tests and General Diagnostics/Trim Height
Inspection).
